Product Parameter
|
Product Name
|
125V 15A Bimetal Thermostat Auto Reset Disc Defrost Thermostat Home Appliance Parts
|
|
Temperature setting range (at no load)
|
-20°C ~ 180°C
|
|
Tolerance
|
Indicated temp ±3°C, ±5°C
|
|
ON-OFF differential temperature. (General)
|
Min 7~10K
|
|
Life Cycle
|
15A/125V AC 100,000 cycles, 7.5A/250V AC 100,000 cycle
|
|
Contact System
|
Normally closed / Normally open
|
|
Electrical Rating
|
15A / 125VAC, 10A / 240VAC, 7
|
|
Diameter of bimetal disc
|
Φ12.8mm(1/2″)
|
| Terminal type |
Customized |
|
Cover/Bracket
|
Customized
|
Applications
- Automatic coffeemakers
- Water heaters
- Sandwich toasters
- Dishwashers
- Boilers
- Dryers
- Electric heaters
- Washing machines
- Refrigerators
- Microwave ovens
- Water purifiers
- Bidet, etc
The Advantage of Automatic Reset Thermostat
Feature Advantage
Automatic reset temperature control switch: as the temperature increases or decreases, the internal contacts are automatically opened and closed.
Manual reset temperature control switch: When the temperature rises, the contact will automatically open; when the temperature of the controller cools down, the contact must be reset and closed again by manually pressing the button.
Craft Advantage
One-time action:
Automatic and manual integration.
Testing Process
Test method of action temperature: install the product on the test board, put it in the incubator, first set the temperature at -1°C, when the temperature of the incubator reaches - 1°C, keep it for 3 minutes, and then cool down by 1°C every 2 minutes and test the recovery temperature of the single product. At this time, the current through the terminal is below 100mA. When the product is turned on, set the temperature of the incubator at 2°C. When the temperature of the incubator reaches 2 ° C, keep it for 3 minutes, and then increase the temperature by 1°C every 2 minutes to test the disconnection temperature of the product.