| Product Name | 125v 5a 10a 15a Bimetal Thermostat Temperature Controller Refrigerator Defrost Thermostat |
| Use | Temperature control/Overheat protection |
| Reset type | Automatic |
| Base material | Resist heat resin base |
| Electrical Rating | 15A / 125VAC, 10A / 240VAC, 7.5A / 250VAC |
| Operating Temperature | -20°C~150°C |
| Tolerance | +/-5°C for open action(Optional +/-3 C or less) |
| Protection class | IP00 |
| Contact material | Double Solid Silver |
| Dielectric Strength | AC 1500V for 1 minute or AC 1800V for 1 second |
| Insulation Resistance | More than 100MΩ at DC 500V by Mega Ohm tester |
| Resistance Between Terminals | Less than 50MΩ |
| Diameter of bimetal disc | Φ12.8mm(1/2″) |
| Approvals | UL/ TUV/ VDE/ CQC |
| Terminal type | Customized |
| Cover/Bracket | Customized |
- Rice Cooker - Dishwasher
- Boiler - Washing Machine
- Water Heater - Oven
- Water Dispenser - Dehumidifier
- Coffee maker - Water purifier
- Fan Heater - Bidet
- Sandwich Toaster
- Other Small Appliances
Feature Advantage
Automatic reset temperature control switch: as the temperature increases or decreases, the internal contacts are automatically opened and closed.
Manual reset temperature control switch: When the temperature rises, the contact will automatically open; when the temperature of the controller cools down, the contact must be reset and closed again by manually pressing the button.
Craft Advantage
One-time action:
Automatic and manual integration.
Test method for action temperature: install the product on the test board, put it in the incubator, first set the temperature at 10°C, when the temperature of the incubator reaches 10°C, keep it for 3 minutes, and then cool down by 1°C every 2 minutes, testing the recovery temperature of the product. At this time, the current through the terminal is below 100mA. When the product is turned on, set the temperature of the incubator at 6 ° C. When the temperature of the incubator reaches 6 ° C, keep it for 3 minutes, and then increase the temperature by 1°C every 2 minutes to test the disconnection temperature of the product.